KWS 1051..
Door holder with hook
Material
aluminium
anchor bolt (for KWS 1051..):
steel, hot-galvanized
roller block:
steel or stainless steel
buffer:
spring-loaded, black
Mode of operation
foot actuation
Door weight
max. 100 kg
Unit weight
0,840 kg (KWS 1051..)
0,550 kg (KWS 1052..)
To hold the door in place, push it against the holder until the hook is engaged on the roller block. Actuating the hook while simultaneously pressing the door against the holder disengages the holding mode.
With anchor bolt (KWS 1051..)
Grout the anchor bolt at the desired arresting point into the floor, which should be the furthest possible distance from the door hinge. After the grouting material has hardened, mount the door holder on with four screws. Fix the roller block to the door at the corresponding position.
Without anchor bolt (KWS 1052..)
Mount the door holder on the floor with four screws and inserted plugs at the desired arresting point, which should be the furthest possible distance from the door hinge. Fix the roller block to the door at the corresponding position.
For height compensation, the additional use of the shim KWS 1610.. (20 mm high) is recommended.
